Equipment
-
$5.95PCO1881 Gas Pressure Relief Valve Cap (PRV)
This cap has been designed to be used with the PCO38 Tapping Head for the PET Mini Keg Range.
As it is a standard PET bottle thread (PCO1881). it can also be used on the FermZilla Collection Container / Lid. -
$59.95Carbonator Reactor - Carbonation Lid for Continuous Soda Water
This is the easy way to have continuous soda water on tap. Don't waste your time with Sodastream or other more expensive carbonators. This simple device makes it easy to have continuous carbonated soda water fed from your mains water supply.
Out of Stock -
$6.95Keg Lid Pressure Relief Valve - 17, 35, 65, 100 PSI
Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.
Now available in three pressure ratings:
Yellow - 17 PSI
Red - 35 PSI
Green - 65 PSI
Grey - 100 PSI -
$34.952L Erlenmeyer flask
2L Erlenmeyer flask made from Borosilicate glass. This means you can boil in it and stick it straight into a cold water bath for cooling right after without the glass shattering. Therefore the chance of contamination of your liquid is vastly reduced.Out of Stock -
$55.005L Erlenmeyer flask
5L Erlenmeyer flask made from Borosilicate glass. This means you can boil in it and stick it straight into a cold water bath for cooling right after without the glass shattering. Therefore the chance of contamination of your liquid is vastly reduced.
Great for making yeast starters. The 5 liter size is mainly useful for larger batch sizes than 23l.
-
$6.95Magnetic Stir Bar - 27mm long
Used in Erlenmeyer flasks to stir yeast using a magnetic stirrer.
Yeast starters increase cell count & viability of liquid yeast.
A magnetic stirrer using a stir bar ensures continuous supply of oxygen for maximum cell growth due to an extended aerobic phase.Out of Stock -
$14.952 Micron Diffusion Air Stone (barb)
Use this 2 micron stone with an oxygen source or an aeration pump to provide your yeast with oxygen pre-fermentation, or with CO2 to speed up carbonation of the finished beer.
The barb fits 1/4" (6.35mm) ID tubing.
From: Keg KingOut of Stock -
$14.95Diffusion Stone - 0.5 Micron (barb)
A carbonation or aeration diffusion stone. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.
The barb fits 1/4" (6.35mm) ID tubing.
Out of Stock -
$40.00Oxygen/Aeration Wand
An Oxygenation/Aeration Wand is an easy to use tool for adding oxygen to your wort to help ensure healthy yeast growth.
The wand kit includes the 60cm stainless steel 8mm OD wand and the 2 micron aeration stone screws into the end using an MFL thread so it can easily be removed for autoclave or dipped in acid solution. The kit also includes a stainless clamp and 2 meters of vinyl tubing.
Note: You will also need an oxygen cylinder and regulator which are not included.
Stone: 2 micron
Wand Length: approx. 650mm total
From: Kegland -
$26.95Oxygen Flow Meter
An Oxygen Flow Meter with Duotight 8mm fittings - 0.1-1.5L/min.
This flow control device is designed to be used with an oxygen cylinder and regulator that can be purchased separately.
