Siphons and Hoses
-
$3.90 -
$2.00 -
$4.95Push fit 1/4" to 3/8" tube to hose adaptor
A 1/4" x 3/8" tube to hose adaptor with a 1/4" hose barb and a 3/8" push-fit connection.Out of Stock -
$2.95EvaBarrier 6.3mm ID - 9.5mm OD hose / tube
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$2.95EvaBarrier 4mm ID - 8mm OD hose / tube
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.
When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$2.95
EvaBarrier 5mm ID - 8mm OD hose / tube
This new 5mm ID EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier. Perfect for gas line.
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$16.95 As low as: $14.95Heavy Duty Silicon Tube Hose (various sizes available)
Silicone hose for liquid transfer. It is resistant to constant high temperatures and will handle temperatures above boiling point, and has excellent chemical resistance. The soft silicon is easy to work with and seals very well.
Please note that this tube should not be used for pressure above 15psi (such as mains water pressure), and has a burst pressure of around 30psi.
-
$42.00Siphon Bottling Kit (580mm)
This handy little siphon to bottle kit does exactly that. Siphon directly out of any vessel above the sediment line directly into your bottles. This is a far easier method than moving all of your bottles up to a tap or wand for filling.
Simply start the siphon and use gravity to fill your bottles whist holding the brew bottler, moving from bottle to bottle.
-
$3.50Hose Tube CVT 10mm ID x 13mm OD (per metre)
Food grade hose - Clear vinyl tubing (CVT)
Internal Diameter 10MM X 13mm Outside Diameter.
-
$2.00EVABarrier Red Lightshield 5mm ID x 8mm OD (per metre)
Red semi-transparent EVABarrier for kegging setups. Easily see your gas lines in minimal light without confusion.
This high quality beer or gas line will keep your previous beverage in it's best possible condition in the process.
