Fermenters
-
$39.95Ss Brew Bucket Ball Valve and Racking Arm
A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.
Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings includedOut of Stock -
$14.00HS White 30L Fermenter Bucket Lid with Hole
Food grade plastic lid with pre-drilled grommet hole for Handcraft Supplies 30L Fermenter. Also fits the Kegland 30L Fermenter Bucket. -
$169.95Inline Oxygenation Kit
The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.
- Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
- 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
- (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
- 3/8" barbed oxygen inlet with ball valve to control flow
- All 304 stainless construction
-
$49.95FermZilla All Rounder - 30L Jacket
This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.
This jacket also completely blocks any light/UV to prevent light struck or skunked beer.
-
$25.00Grainfather Conical Pressure Transfer - Upgrade connection KIT
This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.
Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.
*Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.
Out of Stock -
$24.95FermZilla - 3" Tri-Conical - 600ml Collection Container
This collection container fits all the FermZilla Tri-Conical fermenters that have a 3 inch x 3 inch butterfly valve. No more threads or removal tools to get this off, simply depressurise and remove the tri-clamp fitting. We'd recommend placing a towel or upside down frisby to catch some drips.
Out of Stock -
$59.95Kegmenter Lid with Ball Lock Posts, Dip Tube and PRV
This stainless 4inch tri-clover ball lock lid will enable you to turn your kegmenter into a uni tank, pressurisable fermenter or so it can be used as a keg.
This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to Cornelius type PRVs). The lid has accurately machined gas and liquid posts.
This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.
Out of Stock -
$3.95Top Hat Grommet
The top-hat or T-shaped grommet is a popular choice for use with an airlock in a fermenter lid. Tophat grommets are more robust than the black doughnut shape alternatives which can become damaged, however they are more easily popped out if there is excessive pressure build up in your fermentation vessel due to a blocked airlock. -
$4.95Bored Bung 28-30mm
Demijohn Bored Bung 28-30mm - with an airlock hole.
Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal.
Not compatible with the wide mouth screw top demijohns.Typically made from rubber or silicon.
-
$8.95Rubber stopper / bored bung. #10 w/airlock hole (for plastic carboy)
Rubber stopper / bored bung #10 with airlock hole.
Fits our 11.5l & 23l plastic foodgrade PET carboys perfectly.
#10 size is a standard bung size, in this case 41mm diameter across on the small side, going to 51mm on the wider side.
