Equipment
-
$7.001/4" Shank Tail Piece - Elbow
Stainless steel elbow Tail Piece for your beer shank.
From: Krome Dispense
Material: 304 grade stainless steel
You may also need a hex nut or wing nut, and neoprene washer. -
$4.005/8 Inch Hex Nut for Keg Coupler or Tap Shank
Chrome plated brass Hex Nut, often used for attaching a tail piece to a shank.
You may also need a tail piece and neoprene washer, available separately.
From: Krome Dispense -
$4.10Black Plastic Draft Tap Handle - Long slender
A standard plastic handle for beer taps, with threaded insert to fit most faucets. Our most popular selling faucet handle.
One of many kegging accessories that we stock.
From: Krome Dispensemeasurements:
22.5mm W (top) to 17.5mm W (bottom)
67mm Long -
$8.90Nukatap Growler Filler Spout
The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.
Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.
We recommend using silicone hose, available separately. -
$8.90English Barrel Tap. Tapered Thread
Complete with swivel head and a tapered thread that is compatible with "English" style fermentation barrels. Available in white only.
This is not compatible with the standard 30L plastic fermentation buckets available in NZ. -
$8.80Tap. Italian Barrel & Locknut (med.spigot)
Tap. Italian Barrel & Locknut (med.spigot). As this tap has a backing locknut and two rubber washers, it is suitable for those looking to mount a tap in any plastic vessel once you have drilled a suitable size hole. -
$4.95Silicone Stopper for Brew Bucket and FTSs Lid
Silicone Stopper for Ss Brew Buckets and Chronicals, made from food grade silicone. -
$84.95Leg Extensions for Ss Chronical 52L and 64L Fermenters
Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.
- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total lengthSold as a set of four.
Out of Stock -
$89.95Carbonation Stone - Tri-Clamp
A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.
- 1.5" Tri-Clamp
- 3/8" Hose barb valve
- 0.5 Micron stainless steel carb stone
Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.
-
$39.95Ss Brew Bucket Ball Valve and Racking Arm
A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.
Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included
