pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

TILT Hydrometer

Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.

Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.

Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.

The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).

The perfect pocket kit for brewday, we wouldn't leave home without one! Either weigh out your salts bare knuckled on the stainelss steel pad, or use a small cup and TARE to zero. Ideal for adjusting your pH with brewing salts, as well as measuring out your hops and granulated whirlfloc.

Pipette - 2ml

Perfect for measuring small quantities of liquid product - Like sanitiser, lactic acid or antifoam

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

A dial-type thermometer that is made for the SS Brewtech Brewmaster Kettles, although it could be used in any 1.5" tri-clamp situation. 

Thermometer:

• Dial Face: 3" -
• Tri-Clamp: 1.5"
• Range: -20-120 degrees C, 0-240 degrees F
• Accuracy: +/-1%
• Stem length: approx. 6cm (2.5")

Note: does not include tri-clamp gasket or clamp.

Replacement o-rings (X2) for the Tilt Hydrometer

Digital instant read thermometer with folding probe.

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.