Blow Off Barb For FTSs and Ss Brew Bucket Lids.

- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare)

Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.

- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total length

Sold as a set of four.

A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.

• 1.5" Tri-Clamp 
• 3/8" Hose barb valve
• 0.5 Micron stainless steel carb stone

Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.

A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

• Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
• 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
• (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
• 3/8" barbed oxygen inlet with ball valve to control flow
• All 304 stainless construction

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

This is a basic closed transfer kit for transferring from a simple bucket fermenter to a keg.

Get you beverage from your plastic bucket to your keg without exposure to oxygen. Keep your beer fresh!

See our video for how this works.