Equipment

Position
  2. 71
  3. 72
  4. 73
  5. 74
  6. 75
10
  1. Camlock – Type D female x 1/2 inch female
    $13.00

    Camlock – Type D female x 1/2 inch female

    Camlock – Type D female x 1/2 inch female

    Stainless Steel - 150psi/11Bar Operating Pressure
  2. Camlock – Type E male x 1/2 inch barb Camlock – Type E male x 1/2 inch barb
    $10.00

    Camlock – Type E male x 1/2 inch barb

    Camlock – Type E male x 1/2 inch barb

    Stainless Steel - 150psi/11Bar Operating Pressure
    Out of Stock
  3. Nut – with recess for seated o-ring (1/2 bsp)
    $5.90

    Nut – with recess for seated o-ring (1/2 bsp)

    1/2 BSP Stainless Steel Nut with a recess for an o-ring
    Out of Stock
  4. Tri-clamp Cap 1.5" with 13mm Barb
    $12.95

    Tri-clamp Cap 1.5" with 13mm Barb

    Tri-clamp Cap with 13mm Barb

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
    Out of Stock
  5. Tri-Clamp Pressurised Transfer Fitting
    $39.00

    Tri-Clamp Pressurised Transfer Fitting

    1.5 Inch Tri-Clamp Pressurised Transfer Fitting" 
    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

    Fits Chronical Fermenter Lid - 1.5"

    Out of Stock
  6. Shut Off Valve - MFL With Return Check Valve
    $14.95

    Shut Off Valve - MFL With Return Check Valve

    A gas shut off valve with built in return check valve and MFL nipple.
  7. Tri-Clamp Tee - Micro 1.5" Tri-Clamp Tee - Micro 1.5
    $34.95

    Tri-Clamp Tee - Micro 1.5"

    A tri-clamp tee fitting. This is the micro version
  8. Tri-Clamp Cap with 1/4" Barb
    $12.95

    Tri-Clamp Cap with 1/4" Barb

    Stainless steel tri-clamp cap (1.5") to 1/4″ (6.35mm) Hose Barb.

    • Made out of 304 Stainless Steel
    • 1/4″ OD Hose Barb
    • Designed for use with 1/4″ ID tubing
  9. Hole Plug - 22mm for Ss Brewtech Kettle Hole Plug - 22mm for Ss Brewtech Kettle
    $18.95

    Hole Plug - 22mm for Ss Brewtech Kettle

    A 22mm Hole Plug with o-rings and attachment nut, used to plug thermometer, ball valve, and kettle top recirculation holes on Ss Brewtech kettles.

  10. Tri-Clamp Blank
    $7.95

    Tri-Clamp Blank

    A stainless steel plate to close, or blank off an outlet. Sometimes it is referred to as a blind cap.

    Currently available in these sizes:
    - 1.5" (3.81cm)
    - 2" (5.08cm)
    - 3" (7.62cm)

Position
  2. 71
  3. 72
  4. 73
  5. 74
  6. 75
10