A plastic gas ball-lock disconnect with a 6mm barbed fitting for your gas line. CMB quality. Stainless steel and MFL versions are available.

For gas line we recommend using 6mm Ledavin, commercial grade gas line with a 6mm internal diameter, which is easy to fit over the standard 6mm barb.

Gas shut off probe (Keg Coupler Probe seal o-ring No.4)

Keg Coupler - D Type (US Sankey). This is a low profile coupler designed for situations where vertical space is limited.

Includes a pressure relief valve (releases at 55 PSI).

D-Type Keg Coupler - Full Stainless - with Duotight 5/8" to 8mm push fit fittings.

Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas)

Mangrove Jack's Heater Belt 220-240V. (25W) A heater belt is designed to be secured around your fermenter to help keep it at the right temperature during fermentation. It is possible to regulate the heating of the liquid by adjusting the height of the belt around the fermenter. 

The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -240V

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.

By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.