Counter-Pressure Bottle and Growler Filler

The next generation WilliamsWarn® BrewBottler. This counter-pressure bottler allows you to bottle from a WilliamsWarn® BrewMaster™, BrewKeg™ or Cornelius keg without losing any carbonation.

Here's everything you need to get started with pressure brewing.

Carbonate your beer as it ferments!

Bundle includes:

• Fermzilla - All Rounder - 30L
• Fermzilla - Plastic Pressure Kit
• Integrated Gauge BlowTie Kit (0-15psi)
• Picnic Tap Assembly Kit 

You will also need a CO2 set up (cylinder, regulator, etc.) to keep the fermenter under pressure as it empties (this is not included).

Please note photo differs as we have upgraded to a flow control picnic assembly kit

A stainless steel mesh Bazooka T Screen with 1/2" copper fitting. 

Copper Fitting Diameter: 17 mm ID / 19 mm OD
Material: Stainless Steel 304 mesh and copper fitting

This is a domed false bottom made from stainless steel. It comes complete with stainless steel elbow and 3/8" barbed outlet. These false bottoms are often used for helping to construct a mash tun.

Manifold for Mash Recirculation, intended for, but not limited to, the Ss InfuSsion Mash Tun.

- 304 Stainless construction
- Sits on top of grain bed during mash
- Gentle distributed flow through 24 holes drilled into the top side of the manifold
- 3/8" hose barb on manifold inlet
- Compatible with the recirculation bullkhead fitting and 1/2" FPT to 3/8" knurled hose barb
- Will fit in 38 / 76 gal Ss InfuSsion Mash Tuns, and 38, 57, 76, 114 litre brew kettles
- approx. 32cm total diameter

From: Ss Brewing Technologies, USA

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

A stable mash temp is one of the most important elements of the brewing process. The InfuSsion Mash Tun from Ss Brewtech is the perfect choice for brewer’s looking to upgrade their aging plastic chilly bin. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. 

A stainless heat stick housing to help make a RIMS recirculating mash system.

They have been made with TIG welded 50mm stainless pipe with 2 x ½” BSP female sockets at right angles in the top and bottom for the wort to flow in and out.

On each end there is a tri-clamp end cap, one with a 32m hole pre-drilled so it is ready to mount one of our 2200watt elements. The other end cap has a 20mm hole so it is ready to mount either a thermowell or bulkhead. This makes it easy to then use our temperature controller and pump to build your own re-circulating RIMS system.

The MTSs Temperature Controller is designed for use with Ss Brew Tech's Infusion Mash Tun.

During extended Mash periods or in relatively cold ambient temperatures, the mash will naturally drop in temperature. With the MTSs you will be able to provide better controlled temperatures during the mash scarification process. Holding a consistent scarification temperature will insure you are making the beer and flavour profiles you planned to produce.