Equipment

  1. Grainfather G30 Thermowell & O ring Grainfather G30 Thermowell & O ring
    $31.50

    Grainfather G30 Thermowell & O ring

    Thermometer Probe Cover for the Grainfather G30. Locking nut sold separately.
  2. Brewmaster Beer Line Cleaner
    $8.30

    Brewmaster Beer Line Cleaner

    500ml Sterilser, sediment cleaner for all beer lines and kegs

    Approved by all major breweries

    Circulate a 5% solution (100ml in 2 L warm water) for 15 minutes. Rinse thoroughly with warm water

    ANZFSA C38 Approved

    Alkaline Sats 25%

    Manufactured in Auckland, NZ

  3. G30 Thermometer Probe Cover Nut G30 Thermometer Probe Cover Nut
    $20.95

    G30 Thermometer Probe Cover Nut

    G30 Thermometer Probe Cover Nut
  4. BrewMaster Campden Tablets x50 BrewMaster Campden Tablets x50
    $8.00

    BrewMaster Campden Tablets x50

    Used for sterilising wine.

    Instructions: Add 1 tablet per 5L of must/juice to eliminate any wild yeasts and bacteria, wait 24 hours before adding BrewMaster wine yeast. Contains Sodium Metabisulphate

    CAUTION: Keep out of reach of children. Avoid dust and fumes. Wash hands. If ingested seek medical advice immediately.

  5. KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible
    $99.55

    KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible

    Features:
    - Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
    - Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
    - 6.5mm duotight compatible hose barb, can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
    - Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
    - Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey)

     

  6. Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs
    $19.95

    Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs

    An insulated, neoprene jacket for mini kegs with glow-in-the-dark Kegland branding. Great for BBQs, camping, or parties.

    Features:

    1. 8mm thick neoprene. Most other keg jackets are only 4mm meaning they simply do not insulate as well.
    2. 16gram CO2 bulb pockets.
    3. Velcro around the top so you can attach various accessories.
    4. Comes with heavy duty webbing shoulder strap.

  7. Grainfather Sparge Water Heater 40L
    $379.00

    Grainfather Sparge Water Heater 40L

    With the Grainfather Sparge Water Heater 40L, brewers can heat and keep up to 40L of sparge water at a specified temperature until it's needed. This means they can focus on the rest of their brew day, without having to worry about how or when they're going to heat large volume of sparge water, and avoid the need to use 2 (or more) smaller volume heaters.

    The unit heats up to 40L (10.6 US Gal) of sparge water in approx. 50 minutes, so brewers simply start heating during the mash, and they can forget about it until it's time to sparge.

  8. Auto Reset Switch for - G30 / S40 / T500 Boiler
    $5.80

    Auto Reset Switch for - G30 / S40 / T500 Boiler

    Replacement Thermal Reset Switch for Grainfather G30, Grainfather S40 and T500 Boiler.

  9. Grainfather Pump Housing Grainfather Pump Housing
    $4.50

    Grainfather Pump Housing

    Pump housing for the Grainfather G30
  10. Grainfather Electric Grain Mill Grainfather Electric Grain Mill
    $435.00

    Grainfather Electric Grain Mill

    This motorised, adjustable, easy-to-use Electric Grain Mill makes light work of crushing grain at home, so you can brew fresher beer!

    - Motorised all-in-one Grain Mill
    - Large, fluted rollers for maximum crushing
    - Adjustable crush & speed settings

    The perfect purchase for all-grain brewers who want to go one step further and crush their own grain, or upgrade their existing mill. The Grainfather Electric Grain Mill makes efficient grain crushing easy - simply add a bucket to collect the crushed grain. The custom-built grain hopper holds 1KG of grain at a time - simply continuously top-up as you go!

    Note cannot be used for corn.