Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.

- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total length

Sold as a set of four.

A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.

• 1.5" Tri-Clamp 
• 3/8" Hose barb valve
• 0.5 Micron stainless steel carb stone

Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.

A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.

The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.

These handles are suitable to take load up to 100kg.

The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

• Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
• 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
• (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
• 3/8" barbed oxygen inlet with ball valve to control flow
• All 304 stainless construction

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

FermZilla - SS Ball Float & 80cm Silicone Dip Tube and Filter Kit. Suits Tri-Conical and All Rounder Models.

This simple design allows you to extract the clearest possible liquid in your pressure vessel with the added security of our new filter included. This helps prevent blockages in your carbonation cap poppet. As the liquid level decreases the float goes down at the same time. Perfect for sampling the sediment free!

This 80cm silicone dip tube and stainless steel float with filter suits the FermZilla Tri-Conical fermenter. Also compatible with Kegmenters and Modified Ball Lock Kegs (not minikegs).

From: Kegland