Silicone hose for liquid transfer. It is resistant to constant high temperatures and will handle temperatures above boiling point, and has excellent chemical resistance. The soft silicon is easy to work with and seals very well.

Please note that this tube should not be used for pressure above 15psi (such as mains water pressure), and has a burst pressure of around 30psi.

Swap out your 4mm or 5mm hosing for this smaller internal diameter 3mm hosing coupled with 6.35mm duotight ball lock disconnects (KL24242 and KL24235) for a neat and tidy kegerator, keezer or cellar set up. This sized hosing is perfect for your series X or Series X plus to reduce the bundle of beer line sitting on top of your kegs.

This new 5mm ID EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier. Perfect for gas line.

The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. 

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

A tool for cutting hose and tube, with a stainless steel blade.

A 1/4" x 3/8" tube to hose adaptor with a 1/4" hose barb and a 3/8" push-fit connection.

These 304 grade stainless steel mash paddles are perfect for use with the BrewZilla, Robobrew, Grainfather or Braumeister breweries.  They are an ideal size to be used with breweries from 20L up to 50L in size.

The slotted end is great for getting rid of dough balls and also the handle has a handy hole so you can hang up to dry.

The mash paddle is 61cm long and the head is 6cm x 11.5cm

The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort.